You must have javascript enabled to use belt-buckle.org !

How To Make A Belt Buckle

There are many ways to make a belt buckle, but this simple approach will work for most examples, first, find a belt that you enjoy wearing. This can be anything from servicebelts to belt buckle designs that you find online, second, make a small hole in the strap buckle that will fit the size of the belt. Third, use a sharp knife to make a small incision in the belt. Fourth, use a pencil to help guide the sharpener on the belt needle. Finally, use a circular symmetric current (cos) machine to create the buckle. Do not use a cos machine if you have a belt that withs a circular hole,
Impress your friends and family with this creative strap buckle design

Real Leather Belt Buckle Mens Dress Automatic Ratchet Elegant Gift Dante Genuine

$24.99

  • department
  • size
  • model
  • 00_FRVBNZGF_02
  • mens
  • partnumber
  • Automatic
  • productgroup
  • Adjustable from 20 to 44 Waist
  • gift


The next step is to create the impression of function against your favorite belt, find a small, clean hole in the center of your belt, and use a sharp knife to punch through the belt to get to the needle. Next, use the belt needle to create the small hole.

The North Face Ballar Rain Boots Waterproof Combat Black Lace Up 6.5 M Women's

$59.5

  • heel height
  • Boot
  • us shoe size women s
  • features
  • Ballard Lace Rain Boot
  • 6.5 M
  • not
  • Low (3/4 in. to 1 1/2 in.)
  • No


Buckethe difference

Bulliant Genuine Leather Ratchet Belt Buckle And Strap For Men 1 3/8 No Hole

$24.89

  • size
  • 6.54 x 2.44 x 6.85 inches
  • mpn
  • Does not apply
  • For Men
  • Ratchet
  • package weight
  • Men
  • 3/8
  • 0.71


The final step is to add your belt, next, find the end of the belt that is about twice the size of the hole you created, and use it to push the bucket idea into the hole.

There are a few different ways to make a closure, the first way is to take a belt and remove the buckle, to make it more challenging, use a sharp knife to make a hole in the belt for the buckle. Once the buckle is in the hole, use a sharp knife to create a small channel in the belt so that the buckle will sit properly. Another way to make the buckle is to make the buckle out of metal disk or plate that is about 1” wide and width is 1”, then, make small cuts in the metal disk or plate that is around the bend in the belt. Finally, use a sharp knife to make a small hole in the metal disk or plate and then use a needle-Nose chartularie to press the buckle into the channel.

Belt buckles are one of the most important pieces of jewelry you can wear, they help keep your belt close to your body and help you look like a powerful man, there are a few tips that will make your belt buckle experience a little more special,

The North Face Ballar Rain Boots Waterproof Combat Black Lace Up 6.5 M Women's

$59.5

  • heel height
  • Boot
  • us shoe size women s
  • features
  • Ballard Lace Rain Boot
  • 6.5 M
  • not
  • Low (3/4 in. to 1 1/2 in.)
  • No


-Use a sharp knife or a sharp pointy hatchet to create a small hole in the buckle,
-Add a single layer of gold leaf,
-Put the buckle in the gold leaf and let it dry,
-Add a single layer ofalinine.

The North Face Ballar Rain Boots Waterproof Combat Black Lace Up 6.5 M Women's

$59.5

  • heel height
  • Boot
  • us shoe size women s
  • features
  • Ballard Lace Rain Boot
  • 6.5 M
  • not
  • Low (3/4 in. to 1 1/2 in.)
  • No


-Let the belt buckle dry completely.
Now that you have a strap buckle, it is important to maintain it. You should use a new, fresh gold leaf every time you make a new one for fear that it will remove during use.


Real Leather Belt Buckle Mens Dress Automatic Ratchet Elegant Gift Dante Genuine

$24.99

  • department
  • size
  • model
  • 00_FRVBNZGF_02
  • mens
  • partnumber
  • Automatic
  • productgroup
  • Adjustable from 20 to 44 Waist
  • gift


There are a lot of ways to make a buckle, but we recommend you try out some of the easier ones first,



-Bake a belt buckle in a oven at 350 degrees for 10-12 minutes,
-Make a buckle from a piece of metal that will have a dark color and a light color,
-Resources:
-How to make a closure from a metal piece
-How to make a belt buckle from a piece of metal
-How to make a belt buckle from a metal piece and a bobbins
-How to make a closure from a metal piece and a head
-How to make a belt buckle from a metal piece and a head and a bobbins
-How to make a strap buckle from a metal piece and a head and a bobbins and a head
-How to make a closure from a metal piece and a head and a bobbins and a head

There’s a lot of information out there about how to make buckle, and the truth is that most of it is decent, but the thing is, it’s really easy to get wrong, and that’s why you need to do your own research before anything.
There are three basic steps when making buckle: the belt, the buckle, and the measurements. But don’t let that stop you from doing it, in fact, you can go back to the steps at the bottom of the page and use some of the same steps, and get a good basic buckle.

The North Face Ballar Rain Boots Waterproof Combat Black Lace Up 6.5 M Women's

$59.5

  • heel height
  • Boot
  • us shoe size women s
  • features
  • Ballard Lace Rain Boot
  • 6.5 M
  • not
  • Low (3/4 in. to 1 1/2 in.)
  • No


The first few times you make a belt buckle, you’ll probably have it in your hands the whole time, that’s why it’s important to be patient and not let your heat take away from your time, you don’t want to suffer with a buckle that doesn’t come together easily,
First, take a look at the belt and see if it is well-Materialed. If it is not well-Materialed, then you must be sure that the belt is of good quality. The belt should be of good quality if you want to use it for your buckle,
The second step is to get the right size for your buckle, you don’t want to go too big or too small, a too big buckle will not fit well and will eventually fall apart,

Real Leather Belt Buckle Mens Dress Automatic Ratchet Elegant Gift Dante Genuine

$24.99

  • department
  • size
  • model
  • 00_FRVBNZGF_02
  • mens
  • partnumber
  • Automatic
  • productgroup
  • Adjustable from 20 to 44 Waist
  • gift


The last step is to make the buckle, you can do it by using a new bucklemaker or a old one that you have already sewn together, but be careful! It can be very easy to make a new buckle too large or small, and you can end up with a old, suffering buckle that can’t be used any more,

Bulliant Genuine Leather Ratchet Belt Buckle And Strap For Men 1 3/8 No Hole

$24.89

  • size
  • 6.54 x 2.44 x 6.85 inches
  • mpn
  • Does not apply
  • For Men
  • Ratchet
  • package weight
  • Men
  • 3/8
  • 0.71


So, now you know how to make your own belt buckle, how do you make it well-Materialized and fit well? Here is a tips:

The North Face Ballar Rain Boots Waterproof Combat Black Lace Up 6.5 M Women's

$59.5

  • heel height
  • Boot
  • us shoe size women s
  • features
  • Ballard Lace Rain Boot
  • 6.5 M
  • not
  • Low (3/4 in. to 1 1/2 in.)
  • No


-Take a look at the quality of the belt and make sure that it is well-Materialed.
-Get the right size for the buckle. A too big buckle will not fit well and will end up falling apart,
-Make the buckle using a new bucklemaker or a old one that you have already sewn together,

About the Author

George Beaudion is a self-taught artist and sculptor who specializes in belt buckles. He has been creating belt buckles for over 30 years, and his work has been featured in several national and international publications.